ALL libraries (COBIB.SI union bibliographic/catalogue database)
13.
Buckling interaction of slender plates - Experimental and numerical investigations
Sinur, Franc, 1982- ...
In this paper the bending-shear interaction of slender plates is studied. Six large tests were performed on longitudinally and transversally stiffened girders in the range of high bending moment and ...shear force. In longitudinal direction the web was stiffened with a trapezoidal stiffener positioned at themid web depth for two girders and in the compression zone for the other four girders. The test procedure and test results are presented in details from the point of global behaviour and web buckling. The girders were divided in three groups; within each group one of the parameters was varied. Furthermore, a numerical model built in the general-purpose code ABAQUS is presented and verified against test results regarding initial stiffness, resistance and failure mode. In the last part of this paper the maximum load and the design resistance according to EN 1993-1-5 are compared and discussed.The design resistance was calculated with both options, according tothe effective width method and the reduced stress method.
It was not necessary to add the material to the shelf.
Bibliographic material was successfully added on shelf.
Adding bibliographical material on shelf was not successful.
Material is already on the shelf.
Permalink
URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year
Impact factor
Edition
Category
Classification
JCR
SNIP
JCR
SNIP
JCR
SNIP
JCR
SNIP
Impact factor
Select the library membership card:
DRS,
in which the journal is indexed
Database name
Field
Year
Links to authors' personal bibliographies
Links to information on researchers in the SICRIS system
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
