ALL libraries (COBIB.SI union bibliographic/catalogue database)
13.
Superplasticity of the 5083 aluminium alloy with the addition of scandium = Superplastičnost aluminijeve zlitine 5083 z dodatkom skandija
Smolej, Anton, 1941- ; Skaza, Branko ; Slaček, Edvard, 1951-
This paper deals with the superplastic properties of an Al-4Mg-0.6Mn alloy (AA5083) with the mass fraction of scandium 0.3 %. The investigated alloy was produced by ingot casting and ...thermomechanically treated with hot and cold rolling into sheet with a thickness of 1.4 mm. The superplastic properties of the alloy were investigated with tensile tests at strain rates in the range 3 x 10[sup]{-4} s[sup]{-1} to 1 x 10[sup]{-2} s[sup]{-1} and at temperature from 470 °C to 570 °C. The true-stress, true-strain characteristics, the elongation to failure, the strain-rate sensitivity index and the microstructure of the alloy were determined. The elongation to failure increased with the test temperature and was over 1400 % at an initial strain rate 7.5 x 10[sup]{-4} s[sup]{-1} and a temperature of 550 °C.
It was not necessary to add the material to the shelf.
Bibliographic material was successfully added on shelf.
Adding bibliographical material on shelf was not successful.
Material is already on the shelf.
Permalink
URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year
Impact factor
Edition
Category
Classification
JCR
SNIP
JCR
SNIP
JCR
SNIP
JCR
SNIP
Impact factor
Select the library membership card:
DRS,
in which the journal is indexed
Database name
Field
Year
Links to authors' personal bibliographies
Links to information on researchers in the SICRIS system
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
