VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • On the modeling of vibration transmission over a spatially curved cable with casing
    Otrin, Miha ; Boltežar, Miha
    We propose an approach to the vibration modeling of spatially curved steel wires with a casing and a contact between the outer casing and the inner steelwire. For the mathematical model of the steel ... wire and the outer casing, the Euler-Bernoulli beam theory with no axial pre-load is used, and for the discretisation, finite elements are used. The excitation of the steel wire andthe outer casing is in the form of random kinematic excitation. For the energy dissipation the proportional viscous damping model and the structural damping model are used. The damping parameters are identified from the Nyquistdiagram and from the continuous wavelet transform. For the identification of the frequency dependence of the dynamic modulus of elasticity a method is proposed that uses the measured natural frequencies andthe experimentally determined natural modes. The contact between the steel wire and the outer casing is modelled using the penalty method with the friction in a tangential direction. We show that higher values of the frictioncoefficient have a significant influence on lowering the level of vibration transmission. The model also predicts that the dynamic modulus of the elasticity of a steel wire does not have a major influence on the level ofvibration transmission, which was also validated by experiment. On the basisof an experimental validation the model of a steel wire with an outer casing proved to be suitable for the prediction of the vibration transmission.
    Vir: Journal of sound and vibration. - ISSN 0022-460X (Issues 4-5, Vol. 325, 2009, str. 798-815)
    Vrsta gradiva - članek, sestavni del
    Leto - 2009
    Jezik - angleški
    COBISS.SI-ID - 10936347
    DOI

vir: Journal of sound and vibration. - ISSN 0022-460X (Issues 4-5, Vol. 325, 2009, str. 798-815)
loading ...
loading ...
loading ...

Vnos na polico