VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • Sustainable machining of high temperature Nickel alloy - Inconel 718. Part 1, Predictive performance models
    Pušavec, Franci ...
    This two-part paper presents the results from modeling and optimization of alternative sustainable machining processes of Inconel 718. Nickel and Titanium, as representatives of high temperature ... alloys, with their specific thermo-mechanical properties, pose significant difficulties in machining. The high temperature and the consequent work hardening of these materials during the machining processes adversely affect cutting forces, tool-wear, surface integrity and chip breakability. This first part (Part 1) of the paper presents the experimental study of sustainable high performance machining of Inconel 718 with the development of performance-based predictive models for dry, near-dry (MQL), cryogenic and cryo-lubrication (cryogenic + near-dry) machining processes using response surface methodology (RSM). The robustness of these models was verified using the ANOVA. Cutting forces, surface roughness and tool-wear were measured, analyzed and modeled. The results show that the cooling/lubrication condition has an influence on machining performance and that optimum machining conditions have to be determined, at which an improved overall machining performance can be achieved, while sustainability directions are followed in terms of reducing cutting forces/power consumption, the prolonging of tool-life, and increasing productivity. The models developed in the first part of the paper are used for process evaluation and optimization in the second part, to determine optimum machining conditions for an overall process performance improvement.
    Vir: Journal of cleaner production. - ISSN 0959-6526 (Vol. 81, Oct. 2014, str. 255-269)
    Vrsta gradiva - članek, sestavni del
    Leto - 2014
    Jezik - angleški
    COBISS.SI-ID - 13552667
    DOI

Vnos na polico