VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • Synchrosqueezed wavelet transform for damping identification
    Mihalec, Marko ; Slavič, Janko, 1978- ; Boltežar, Miha
    Synchrosqueezing is a procedure for improving the frequency localization of a continuous wavelet transform. This research focuses on using a synchrosqueezed wavelet transform (SWT) to determine the ... damping ratios of a vibrating system using a free-response signal. While synchrosqueezing is advantageous due to its localisation in the frequency, damping identification with the original SWT is not sufficiently accurate. Here, the synchrosqueezing was researched in detail, and it was found that an error in the frequency occurs as a result of the numerical calculation of the preliminary frequencies. If this error were to be compensated, a better damping identification would be expected. To minimize the frequency-shift error, three different strategies are investigated: the scale-dependent coefficient method, the shifted-coefficient method and the autocorrelated-frequency method. Furthermore, to improve the SWT, two synchrosqueezing criteria are introduced: the average SWT and the proportional SWT. Finally, the proposed modifications are tested against close modes and the noise in the signals. It was numerically and experimentally confirmed that the SWT with the proportional criterion offers better frequency localization and performs better than the continuous wavelet transform when tested against noisy signals.
    Vir: Mechanical systems and signal processing. - ISSN 0888-3270 (Vol. 80, Dec. 2016, str. 324-334)
    Vrsta gradiva - članek, sestavni del
    Leto - 2016
    Jezik - angleški
    COBISS.SI-ID - 14633755

    Povezava(-e):

    http://www.sciencedirect.com/science/article/pii/S0888327016300899
    DOI

Vnos na polico