-
Racking resistance of timber-glass wall elements using different types of adhesivesŠtrukelj, Andrej, 1962- ; Ber, Boštjan ; Premrov, Miroslav, 1967-the south-oriented external wall, it is of primary importance not only to take advantage of a high possible solar potential to heat the building, but also to assure a horizontal stability of such ... timber-glass structures. The paper presents the outcomes of a large experimental research on timber-glass wall elements where glass panes are directly bonded to the timber frame, which results in a load-bearing and visually interesting wall element suitable for lightweight timber structures. Three different types of adhesives (silicone, polyurethane and epoxy) were used with two different bonding line conditions to obtain an optimal type of connection which will be in praxis suitable for wall elements subjected to either monotonic or dynamic load impact. In the presented experimental research, strain measurements were supported by additional numerical FE analysis. Only such detailed studies and analyses could lead to the complete understanding of the specimen%s failure mechanism. The failure mechanism depends primarily on the type of adhesive and the type of bonded joints. These two parameters have a decisive impact on the element ductility and are important for further research. The analysis of the measured and calculated values confirmed the predictions that the stiffness and load-bearing capacity of timber-glass wall elements crucially depend on the interaction between the wooden frame and glass, which in turn is a function of the flexibility of the particular type of adhesive used.Vir: Construction & building materials. - ISSN 0950-0618 (Vol. 93, September 2015, str. 130-143)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2015Jezik - angleškiCOBISS.SI-ID - 18721046
Avtor
Štrukelj, Andrej, 1962- |
Ber, Boštjan |
Premrov, Miroslav, 1967-
Teme
okvirna lesena gradnja |
steklo |
lepilo |
vezna sredstva |
sovprežne konstrukcije |
eksperimenti |
numerično modeliranje |
timber-framed structures |
glass |
adhesive |
bondend joint |
timber-glass element |
composite structures |
experiments |
numerical modelling
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
| Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
|---|---|---|---|---|---|---|---|---|
| JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP | |
Faktor vpliva
Baze podatkov, v katerih je revija indeksirana
| Ime baze podatkov | Področje | Leto |
|---|
| Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
|---|---|
| Štrukelj, Andrej, 1962- | 05940 |
| Ber, Boštjan | 38730 |
| Premrov, Miroslav, 1967- | 14095 |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
| Mesto prevzema | Status gradiva | Rezervacija |
|---|
Prosimo, počakajte trenutek.