VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
The effect of temperature on the transfer layer of an aluminium alloy on tool steel and the effect of CrN coatingKalin, Mitjan ...It is essential to explore temperature's crucial role while unveiling the intricacies of tribological interplay in CrN-coated steel-alloy systems. In the present study, tribological potential of ... CrN-coated hot-work tool steel was investigated under unidirectional single-pass sliding wear conditions. The sliding wear tests were performed at different temperatures (i.e., 20 °C, 100 °C, 200 °C, 300 °C, 400 °C and 500 °C) for the different sliding distances between 2 mm and 68 mm to explore the effect of temperature on the initiation and evolution of the transfer of an aluminium alloy (EN AW-6060). The effect was studied in terms of the contact area of the aluminium alloy and the volume transferred to the surface of the CrN. In addition, the structure of the wear trace and the equivalent friction coefficient were monitored with respect to the sliding distance and the temperature. The results show the strong dependency of the tribological potential of the CrN coating and the aluminium alloy on the temperature but show insignificant dependency on the sliding distance. When sliding up to 200 °C, the transfer was found to be dependent on the surface roughness of the coating, while strong adhesion led to the aluminium alloy's transfer during sliding at higher temperatures, that is, above 300 °C. At 500 °C, the CrN coating formed a self-protective Cr2O3 oxide that reduced the adhesive transfer of the alloy to the CrN compared to that at 200 °C–300 °C.Vir: Tribology : materials surfaces & interfaces. - ISSN 1751-5831 (Vol. 18, iss. 1, Jan. 2024, str. 11-19)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2024Jezik - angleškiCOBISS.SI-ID - 196255747
Avtor
Kalin, Mitjan |
Jerina, Jure |
Sharma, Sandan Kumar |
Kovač, Janez, 1965-
Teme
aluminijeve zlitine |
CrN prevleke |
prenos materiala |
trenje |
obraba |
aluminium alloys |
CrN coatings |
material transfer |
friction |
wear
| Avtor | Kalin, Mitjan ... |
| Naslov | The effect of temperature on the transfer layer of an aluminium alloy on tool steel and the effect of CrN coating |
| Datum objave | 2024-01-15 |
| COBISS.SI-ID | 196255747 |
| Verzija objave v repozitoriju | Založnikova različica |
| Licenca objave v repozitoriju | Ni določeno |
| Embargo | Takojšnja javna objava |
Projekti in financerji, navedeni v objavi
| Naziv | Akronim | Številka projekta | Financer |
|---|---|---|---|
| Tribologija | P2-0231-2022 |
Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije |
Datoteke, ki spadajo k objavi
| Povezava |
|---|
|
|
|
|
vir: Tribology : materials surfaces & interfaces. - ISSN 1751-5831 (Vol. 18, iss. 1, Jan. 2024, str. 11-19)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
| Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
|---|---|---|---|---|---|---|---|---|
| JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP | |
Faktor vpliva
Baze podatkov, v katerih je revija indeksirana
| Ime baze podatkov | Področje | Leto |
|---|
| Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
|---|---|
| Kalin, Mitjan | 14556 |
| Jerina, Jure | 33243 |
| Sharma, Sandan Kumar | 52537 |
| Kovač, Janez, 1965- | 15703 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
| Mesto prevzema | Status gradiva | Rezervacija |
|---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: