VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • The efficiency of a corrosion inhibitor on steel in a simulated concrete environment
    Gartner, Nina ; Kosec, Tadeja ; Legat, Andraž
    The aim of the present work was to characterize the efficiency of a corrosion inhibitor on steel in a simulated concrete pore solution. Laboratory measurements were performed at various chloride and ... inhibitor concentrations in order to simulate different applications of the inhibitor when used for the protection or rehabilitation of steel reinforcement in concrete. Two electrochemical techniques, i.e. potentiodynamic polarization scans and electrochemical impedance spectroscopy, were used for this study. The exposed surfaces of the steel specimens were subsequently investigated by Raman spectroscopy and scanning electron microscopy. It was found that the inhibitor can efficiently retard the corrosion of steel in a simulated concrete pore solution at concentrations of the inhibitor >2.0% and of chlorides <0.3% at a pH 10.5. On the other hand, when these conditions are not fulfilled, localized corrosion was observed. The results of the Raman and SEM/EDS analysis showed various morphologies of corrosion products and different types of corrosion attack depending on the pH of the pore solution, and the applied concentrations of the chlorides and the inhibitor.
    Vir: Materials chemistry and physics. - ISSN 0254-0584 (Vol. 181, Dec. 2016, str. 31-40)
    Vrsta gradiva - članek, sestavni del
    Leto - 2016
    Jezik - angleški
    COBISS.SI-ID - 2232167

    Povezava(-e):

    http://www.sciencedirect.com/science/article/pii/S0254058416306587
    DOI

Vnos na polico