VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • Simulation of transient flow in micro-hydraulic pipe system [Elektronski vir]
    Urbanowicz, Kamil ...
    This paper presents the modelling and simulation of transient flow in micro-hydraulic pipe systems. Liquid stream energy dissipation occurs mainly as a result of friction losses. Theoretical ... considerations of water hammer resulting from rapid valve closing, supported by experimental verification, were undertaken. The experimental system incorporated a straight two-meters long section of a steel pipe with an internal diameter of 4x10-3 m. An attempt was made to determine the degree of conformity of the transient flow model (previously verified in conventional pipes) to the experimental results obtained for small-internal-diameter pipes. Shear stress on the pipe wall was modelled using first a simplified quasi-steady approach and then an effective modified unsteady friction model. The pressure waveforms at the valve (at the downstream end of the pipe) were obtained for initial flow velocity, v01=2.39 m/s and v02=1.14 m/s, respectively. Experimental studies were carried out in the region of laminar flows with Reynolds numbers below 100.
    Vrsta gradiva - prispevek na konferenci
    Leto - 2021
    Jezik - angleški
    COBISS.SI-ID - 58039299